AV Support Link: network and security requirements
- Document
- AVSL-001
- Version
- 1.0
- Last reviewed
- Owner
- James Pennucci
- Contact
- support@avsupportlink.com
- Applies to
- AV control systems
AV Support Link lets the programmer who supports a meeting room's AV control system reach that system to troubleshoot it, without traveling to site. Someone at the room turns it on for a set time, and it ends by itself. It needs one outbound rule and nothing inbound.
1Firewall requirement
| Source | Destination | Port | Protocol | Direction |
|---|---|---|---|---|
| AV control processor, or the AV technician's laptop | relay.avsupportlink.com | 443 | TCP (TLS) | Outbound |
No inbound rule, port forward or VPN is needed, and nothing is installed on your computers. Please allow the name rather than its IP address: the address behind the name can change.
If your firewall inspects TLS, exempt relay.avsupportlink.com. The connection
carries its own end-to-end encrypted session, which inspection can't open and may break.
2What it is
Meeting rooms are run by an AV control system: a control processor and touch panels that switch sources, cameras, microphones and displays. When one misbehaves, the programmer who wrote its program often needs to look at it live. AV Support Link connects the programmer to that equipment for a short session.
It runs in one of two places, and only while it is turned on:
| On the room's control processor | Turned on from a hidden page on the room's touch panel. It runs for the time chosen (one hour unless set otherwise, eight hours at most), then ends by itself. |
|---|---|
| On an AV technician's laptop | Runs for the length of a site visit. It ends when the technician ends it or closes the program, and nothing is left installed or running. |
3How it connects
4Security controls
4.1 When it runs
- Off until it is turned on at the room: from the room's touch panel, or by the technician on site.
- Every session has a time limit and ends by itself. It can be ended at any moment from the room.
- A new password for every session. Five wrong passwords end the session.
4.2 What it can reach
- From the control processor, only that processor's own maintenance connections: its console (SSH, TCP 22) and its control ports (TCP 41794 and 41796).
- From a technician's laptop, only the AV control devices the technician ticks, and devices they add themselves. The technician can untick a device to cut it off at any time.
- Program changes can be refused: the room's page and the technician's window each have a setting that blocks remote loading.
4.3 Encryption and logs
- Each session is encrypted end to end with TLS 1.3, keyed from that session's one-time password. The relay only passes the encrypted traffic and keeps none of its content.
- The connection to the relay is itself TLS, with a publicly trusted certificate for
relay.avsupportlink.com. - Every session is logged where it ran: who connected, each connection to a device, each program load or log download, and why it ended.
5What it never does
- Open inbound ports, or ask for any firewall change beyond the rule in Table 1.
- Reach your PCs, servers, file shares or anything else on your network.
- Install anything on your computers, or keep running after the session ends.
- Connect on its own: someone at the room turns it on each time.
- Run on networks that don't allow outside connections.
6Questions from IT
Why is relay.avsupportlink.com in our firewall logs?
Someone at one of your rooms turned it on, from the room's touch panel or on a technician's laptop. If you didn't expect it, ask the AV integrator that supports the room, or write to the contact below.
Can we stop it?
Yes. Blocking relay.avsupportlink.com stops it from connecting; nothing else in the room depends on
it. Your AV integrator can also remove it from the room's program.
Is it connected all the time?
No. On the processor it is dormant until turned on and ends at its time limit. On a technician's laptop it runs only while the technician has it open.
7Owner and contact
AV Support Link is run by James Pennucci, an AV control systems programmer, for the rooms he and his colleagues program and support. Questions from IT and security teams are welcome.
| Owner | James Pennucci |
|---|---|
| support@avsupportlink.com | |
| Security contact | /.well-known/security.txt |